Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Complete kit to assemble a simple LED light bulb. E27 base. LED 5630 cold glow 18 pcs. Design power 18x0.3 = 5.4 (W). A circuit with a ballast capacitor is used as a driver.
NOT available.
Expected price:64,49UAH
from 1 pc :
—
64,49
UAH
from 2 pcs :
—
61,26
UAH
( -5,0%)
from 5 pcs :
—
58,04
UAH
( -10,0%)
Prices are indicated at the time of product availability and may change upon receipt
To assemble the lamp, you need to solder the capacitors, observing the polarity of the electrolytic capacitor.
Solder the connecting wires to the board and connect the wires to the lamp base.
The base can be glued to the lamp body, but it is best to use a core to make notches along the perimeter of the upper edge of the base, retreating 1.5-2 mm from the edge.
Getinax board is used. All boards are checked and in good working order. Test samples are collected and perform well.
The assembled lamp should not be used outdoors. moisture can enter the housing and damage the lamp.
PRINCIPAL DIAGRAM:
Capacitor ratings: C1 = 1.3 μF/400 V; C2 = 47μF/100 V.
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр
unknown
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
